Nitro Radio Cars

Which Radio Controlled Vehicle Is Right For You?

If you prefer a hobby grade vehicle then there are some choices to make. Do you want one that runs on batteries? These have electric motors that are run by the use of rechargeable batteries. The advantage to these types of vehicles is there is no fuel to mess with. They come with either a brushless motor or a motor with brushes. They can be the off road design or on road design and come in either car or truck styles. These are often a good choice for beginners as they do not need as much maintenance as the fuel type.

When choosing the right kind of radio controlled vehicle to purchase there are a few things to consider. First, is it for a child or an older person, for a young child a toy grade vehicle is often the better choice.These can be found in many stores in the toy department.  If you are not sure you will enjoy this hobby you may want to try a toy one first.

Rc nitros that are considered for on road use have a more rigid suspension system and are made for smooth surfaces only. These can be used in parking lots and driveways. They are not made for rugged terrain and jumping or climbing. Off road vehicles are equipped with better suspension systems and are made especially for rough terrain and jumping or climbing.

If you are serious enough you will probably decide to get a nitro fueled vehicle. Although these are more complicated to work with they are faster and more dependable than the electric vehicles. Rc nitros run on a mix of nitro methane, methanol and oil. You can get them in either the on road version or the off road version. So make sure you know where you will be running them before making your purchase!

Rc nitro cars use a single servo for both braking control and throttle control. If you rotate the servo in one direction it will make the throttle open more and increase the speed. Rotating the servo in the other direction will cause friction, thus slowing the car down. Rc nitros are totally air cooled allowing them to run a long time if they are properly tuned, without the worry of overheating. Another advantage over electric cars is that nitro cars can be refueled in a matter of seconds compared to the recharging of batteries for electric powered rc cars.

Customizing your Radio Controlled Car Like a Pro

In the world of the radio controlled car racing, making your cars as unique and as powerful as possible is a must. Racers customize their cars without end because it is the specifications and enhancements to its’ features that make it a better race car. The more sophisticated RC engines have become, the more alterations they have need. Today’s cars can now run through any terrain and condition without sacrificing speed.

Modifying your radio controlled car is a difficult task if you are doing it for the first time. To assist in evaluating the well known conversion styles, listed below are some

customized RC cars.

1. Monster GT from Team Associated is considered as the toughest RC truck on the market. It has a .21 nitro engine that has 8 oil filled shock absorbers, humongous

universal drive axles, an exclusive dual-starting system, disc brakes, tuned pipes, and a strong aluminum chassis.

Its original dual pick up tank keeps the fuel running even if the truck is upside down. Currently, it has two painted styles available, excluding the limited edition model with a painting of the American flag.

2. X-Factor from XTM has developed a reasonable number of followers since its release in 2003. This monster car has a four link, solid axle suspension that allows it

to move with greater control. Its pioneering engine (XTM 24-7) and electronic mixer (XTM R-Box) give the X-Factor its throttle power and awesome handling in any terrain and condition.

3. The T-Maxx of Traxxas is one of the best selling RC trucks currently. Its award-winning features include automatic shifting and two speed transmission that can go

forward and/or backwards. Its speed of 40 ++ miles per hour is backed up by a strong 2.5 racing engine that gives 60 percent more power that any of it predecessors in the Traxxas line.

Its original WideMaxx Suspension, along with the anodized T6 chassis, gives this racer superior stability when conquering difficult and bumpy terrains.

4. The special, limited edition Mad Force by Kyosho has a solid axle shaft drive, 3mm thick chassis with aluminum plates, and aperture dual disc brakes. This four wheel monster truck has 3 transmissions with double shock mounts and has polished side and lower deck plates.

Customizing your RC is part of the excitement of this sport. So choose those features that you want, fasten your seatbelt, and get ready for some serious speed!

Rc Beginner Basics: How to Get Started With Radio Controlled Car Hobby

Within each person is a high, a desire to expand one’s horizons. While some require a huge physical and monetary challenge, embarking in a radio controlled car hobby is much less demanding and more practical to turn into a reality. But a radio controlled hobby is no joke to deal with. It could turn nasty if you don’t get yourself ready for it. The desire is just the start of passion and a time-consuming journey which can be one of your life’s’ greatest rewarding activities.

First you need to determine which you would prefer to have: toy RC kits or hobby kits. Hobby kits are higher in quality but require more expertise. A good way to test if the hobby is for you is by purchasing the toy kit first and then stepping up to the more sophisticated hobby kit if you get the feel for the hobby. Toy kits are assembled and even available in toy stores, while hobby RC cars require assembling capabilities and a bit more than basic knowledge.

There are a host of RC car types available for you, and only you can determine which suits your fancy. There are scale models which are 1/20 of the original, and there are others which are life-size or even bigger than the original. If you’re just getting started the smaller the better and more manageable. They vary in speed depending on size and power source.

There are two types of power source available for a typical radio controlled car: electric and fuel. In terms of speed, engine powered ones are more reliable and exciting to use. However, electrically generated ones are much more user-friendly as far as maintenance is concerned. Since you are beginner, always choose the lesser evil and upgrade to a higher challenge only when you are knowledgeable enough to do so.

Electric-powered motors require a radio system to keep them going. These include a transmitter, a receiver and servos. Servos are placed in both the vehicle and the receiver. They serve as connecting nodes between commands from the transmitter to the receiver. The battery pack is rechargeable, though it takes much longer to charge. Some tools for the hand are also needed for the routine maintenance checks.

Engine-powered ones also require a radio system. But its battery is non-rechargeable by electricity. An igniter is also needed, since it relies on fuel combustion to move it at awesome speeds. Nitro models don’t usually operate on gasoline. It requires a different mixture of chemicals for combustion. You will definitely need a bottle for fuel storage; lest you run out in the midst of the action.

Tips on How to Store Radio Controlled Cars

First things first! Why is it important to clean and properly store radio controlled cars? Do you remember the reason your mother always told you to clean yourself up, clean your room, wash the dishes, etc.? That is – to keep you clean as well as up and running.

The same is true with radio controlled cars. The following are effective and necessary tips to store and keep those vehicles in great shape.

Believe it or not, the fuels used in nitro trucks or cars as well as in radio-controlled cars contain lubricants. The lubricants in these cars actually serve to protect the engine. This is due to the fact that not all of it gets burned when the engine runs. This therefore results in a chassis that is coated with a lot of oil which made its exit from the car’s pipe.

The way to remove this as easily as possible is by using a cleaner: one example is Simple Green. However, it is best to first remove all and any radio equipment before cleaning; after which, plug the inlets onto the engine. Another option is by removing the engine itself.

The chassis should then be sprayed down lightly. Use a brush that has a firm bristle to knock away any grime. Once the chassis has been cleaned, use a towel to dry it. Then, re-install the removed components.

The majority of radio-controlled cars have an electric starter. The bearings in this starter should always be oiled and cleaned at least every week or two.

The starter should then be removed as carefully as possible. The use of a screwdriver is an effective way to keep the pressure on the mechanism as the starter is pulled off the plate’s back.

Spray the bearing with engine spray in order to clean it. Oil the bearing in order to keep it running smoothly. You will discover that once the engine and starter is reassembled, it will work almost as good as new.

Fuel should be stored in a place that is dry and – as much as possible – away from pets, children, or anyone else who could mistake the fuel as washer for the windshield.

All in all, when fuel is stored, it could absorb water vapor over a significant amount of time, especially if the container is not sealed perfectly. It is best to store bottles on a cardboard and not on the carpet directly or on cement.

How Radio Controlled Car Racing Came About

It was in the 1940s when diminutive, nitro-methane powered engines were first marketed. They had a speed that can reach of up to 113 km/h but can only run in circles from a tether. It was there that it got its nicknames of “spin dizzies” and “tether cars”.

During the 1960s, the first miniature cars that could be controlled via radio from a distant transmitter were introduced. These new model cars had the power to steer, accelerate, and brake at the driver’s will. These cars are capable of running through racetracks with accurate control, and thus, radio controlled car racing was born.

In 1984, radio controlled car manufacturer Associated Electrics, Inc. introduced a classier and sleeker version of model race car called the RC10. The RC10 was electric powered; unlike the common cars that were nitromethane-driven. It was a deviation from Associated Electrics usual line of RC’s. RC10 was made from a more powerful aluminum alloy and it had built in shock absorbers that were adjustable.

Aside from its new electric capacities, the RC10 model had the option to incorporate small ball bearings made of stainless steel into its wheels and transmission. Also, its transmission had steel rings forced down on the ball bearings, a feature enabling full modification for any track situation. Without question, RC10′s abilities made it the top choice in electric RC racing.

In 1986, another RC manufacturer, Schumacher Racing Products, launched their Competition All Terrain (CAT) model car. It is a four wheel “buggy” racer that was considered as the greatest of its class. It went on to win the 1987, 1990, 1994, 1995, and 1996 world championship off-road race. This model car was recognized as initiating and popularizing the interest in four wheel car racing.

Team Losi, a popular radio controlled car racing team, released their JRX-2 model buggy and immediately began a rivalry with Team Associated that survives until today. Both teams headline the American radio controlled car racing scene, with Gil Losi, Jr. acting as the formers’ founder and leader. Team Losi was the first to produce miniature tires that were all natural, the first four wheel “buggy” that was American-made , and a new set of car types that were 1/18 scale of the Mini-T.

Outside of the American RC racing circuit, other makers like the Kyosho (Japan) and Schumacher (Europe) hold much market share both in innovation and technology. They are the prevalent choice of makers for hobbyists in their respective regions.

Radio controlled car racing is an excitable game that promotes accuracy, discipline, and car engine knowledge. It is no wonder that it’s a well liked hobby across the globe.